Alex flotando y cocó sentada, en un salto en estudio. Fotografía Analógica - Toma directa, Camara: Nikon n90s; Objetivo 70 mm; Película: Kodak T-Max 100
Vex sells a 126 reamer, but if you actually need 1245 for a press fit, you’ll either have to CNC machining find/commission an appropriate reamer, or get an adjustable one and take the time to dial it in. Annular cutters will work well without having a shank turning down but value a little} extra. Step drills and drill bits tend to to|are inclined to} drill oversize even when you go up in small increments.
Vex sells a 126 reamer, but if you actually need 1245 for a press fit, you’ll either have to CNC machining find/commission an appropriate reamer, or get an adjustable one and take the time to dial it in. Annular cutters will work well without having a shank turning down but value a little} extra. Step drills and drill bits tend to to|are inclined to} drill oversize even when you go up in small increments.
ResponderEliminar